TEL: +86 0317 4300862

FAX: +86 0317 4300862

MOBILE: +86 137 85685215

+86 156 03176509


>> View More

Home >> News

Nine Points in operating Rebar Thread Rolling Machine(1)

The rebar thread rolling machine is different from the other thread rolling machines,so we can't according to the original method to operate and use it.In order to the safety operation,you should pay more attention to nine ten points:
1.Someone must be in charge of the equipment,and the operators should show the certificates.
2.Before using the rebar thread rolling machine,please make sure all parts install well,connection is strong,the running parts lubrication situation are in good condition and no leakage phenomenon.After empty run test,then you can enter the normal operation.
3.When processing the rebar,you should use the rebar cut by the toothless saw,it is forbidden to use the cutting machine cut the rebar,that prevent the failure and the damage the blade.
4.When threading,make sure the rebar is clamp firmly.

Previous News:Nine Points in operating Rebar Thread Rolling Machine(2)

Next News:No One!

Copyright © CANGZHOU BARTECH CONSTRUCTION MATERIAL CO., LTD. All Right Reserved.  冀ICP备09009470号-1

TEL: +86-317-4300862Mobile: +86-137 85685215EMAIL:

Home| Products| About Us| News| Certificate| Project| Contact Us

Technical Support: